Roofing Contractor
High Point, NC
Roofing in High Point, NC: four counties and one city line
Roofing in High Point starts with a question the map asks before anyone climbs a ladder: whose permit. Inside the city limits it runs through High Point’s own Development Services Department; outside them the address decides whether Guilford, Randolph, Davidson or Forsyth County pulls the permit. Four counties meet at one furniture town, and a crew that has not settled which one you are in has not started the job.
The rest is Piedmont physics. Hard summer heat and winter ice work a roof from both directions, which is why underlayment choice and honest attic ventilation matter more here than any single shingle; flooding follows the creeks feeding the Deep River basin rather than one big river. The housing runs from mill-village stock and mid-century ranches to the designer roofs of Emerywood, and a roofer here has to be credible on all of it.
Big Bear Roofing is a GAF Master Elite contractor and holds NCLBGC license L.88260 in the Roofing classification, serving High Point on both residential and commercial work.
Expert Services. Best Prices. At Big Bear Roofing, we are proud to offer Lifetime Roof Replacement Warranties on all of our repair and replacement services. By using high-quality materials and advanced techniques, we ensure your roof not only meets but exceeds industry standards, giving you peace of mind that your investment is protected for years to come.
Roofing Contractors in the High Point Area
Roof damage requires immediate attention to prevent further risks to your home’s integrity. Storms with heavy winds or hail can cause significant damage, often going unnoticed until leaks appear. At Big Bear Roofing, we are one of the few roofing contractors in High Point, NC, that respond quickly to roofing emergencies.
When you contact us, our certified team conducts a thorough inspection to identify issues such as torn or missing shingles, worn granules, rusted flashing, cracked caulk, or damaged rubber boots around pipes. Trust us to provide reliable solutions to protect and extend the lifespan of your roof.
Roofing in High Point, county by county
High Point sits in four counties, so the first thing to settle on any roof is whose permit it needs. Big Bear Roofing works the city from our North Carolina operation in Raleigh, alongside Greensboro and the Triad.
Permits and who reviews your roof
Inside the city limits, permits run through the City of High Point Development Services Department. Outside them your address decides: a High Point mailing address can sit in Guilford, Randolph, Davidson or Forsyth County, and that county permits the work.
One state threshold runs underneath all four. North Carolina’s permit statute exempts some code-compliant work costing $40,000 or less in a single-family home, but the exemption has carve-outs — structural work among them — and under the state code replacing more than 15% of the roof deck is structural work: R908.3 of the 2018 NC Residential Code, effective January 1, 2022. It does not displace a permit your city or county requires, and the office that reviews your address confirms what applies to your scope.
Licensing is separate. North Carolina requires an NCLBGC general contractor license on projects of $40,000 or more, the threshold House Bill 488 set effective October 1, 2023. Big Bear holds NCLBGC license L.88260 in the Roofing classification — checkable on the board’s licensee search, as our guide to verifying a North Carolina roofer explains.
Two reviewers can sit above it. The city’s Historic Preservation Commission oversees historic districts including Johnson Street and Sherrod Park, where a Certificate of Appropriateness governs a change of roofing material. In planned communities such as Emerywood, an architectural review committee approves exterior changes under the North Carolina Planned Community Act, and the association’s published standards decide material and color.
Wind, ice and what the code decides
Inland Piedmont design winds are far below the coast’s, so what matters here is labeling. Shingles carry an ASTM D3161 label (Class F = 110 mph, fan method) or an ASTM D7158 label (Classes D, G and H = 116, 155 and 194 mph), and the code accepts either. Drip edge is a manufacturer’s-instructions question in North Carolina, not a code mandate: the state deleted R905.2.8.5, though most manufacturers require it and warranty coverage often turns on it. North Carolina enforces the 2018 NC Residential Code; the 2024 edition takes effect twelve months after the State Fire Marshal certifies the statutory conditions, and no calendar date has been published.
The homes here, and the roofs that fit them
The older homes off North Main Street carry pitches steep enough that staging and harness work come before shingle work. The mid-century ranches along Eastchester Drive sprawl, and poor original ventilation tends to show up beneath them as deck damage at tear-off. Emerywood runs to designer asphalt and synthetic slate, a different job from the city’s mill-village stock.
Storm history across the four counties
The four counties do not share one weather story. Guilford County logged eleven hail reports of an inch or more on March 16, 2025, the largest two inches at Broadview, and the same system put one-inch hail down at Glenola in Randolph County. Randolph had its own day on April 22, 2025 — five reports of an inch or more, to an inch and a half at Liberty. On the Davidson and Forsyth sides, that window’s reports are thunderstorm wind, not hail.
We inspect and document storm damage to support your claim; we do not file, handle or negotiate it, because North Carolina licenses public adjusters under G.S. § 58-33A-10, and no contractor can promise a carrier’s decision. North Carolina treats a contractor paying, waiving, rebating or hiding your deductible as insurance fraud under G.S. § 58-2-161.
Commercial roofing in High Point
Downtown’s Furniture Market blocks run mixed overlays and flat-to-steep tie-ins, where low slope meets pitch. A building here may carry TPO, EPDM or modified bitumen; Big Bear’s own commercial line is fluid-applied and low-slope, or flat, roofing. Uplift ratings are pressure ratings, not wind speeds — FM 1-90 means 90 pounds per square foot of uplift. See our commercial roofing page.
Roof replacement and reroofing
A roof replacement in North Carolina includes taking the existing coverings off down to the deck. It is a code event: what goes back on meets the code in force, while deck repairs and flashing follow what the tear-off reveals, the manufacturer’s instructions and the permit authority. As a GAF Master Elite contractor — only 2% of roofers in North America are invited, GAF says — Big Bear can offer the Golden Pledge: limited lifetime coverage on manufacturing defects, a 50-year non-prorated period, and 25 years of workmanship. Big Bear offers flexible financing options — ask your estimator. See our roof replacement page.
Repair, storm damage and metal roofing
Common repair items include a brittle pipe boot, chimney step flashing, a valley shedding granules and fasteners lifted on one wind-exposed slope; see our roof repair page. After hail or wind the inspection and documentation come first, free and with no obligation, drone-assisted where that helps; see our storm damage page. Standing-seam metal is its own trade, built on panels and seams rather than a nailing pattern; see our metal roofing page.
Frequently asked questions
Do I need a permit to replace my roof in High Point?
It depends on the scope, the cost and the office that reviews your address. North Carolina’s permit statute exempts some code-compliant work costing $40,000 or less in a single-family home, but the exemption has carve-outs and does not displace a permit your city or county requires. Replacing more than 15% of the roof deck is structural work under R908.3, which puts the job back inside the permit requirement.
My address says High Point but I am outside the city limits. Who permits my roof?
Your county. High Point spans Guilford, Randolph, Davidson and Forsyth counties, and an address outside the city limits is permitted by whichever one the parcel sits in.
Is drip edge required by code in North Carolina?
Not by the code itself. North Carolina deleted R905.2.8.5 and replaced it with “not required unless required by the roof covering manufacturer installation instructions”. Most manufacturers require it anyway, so the answer sits in the product’s instructions.
There is no charge and no obligation — request a free High Point roof inspection.
FINANCING AVAILABLE
A Better Roof At A Better Price
Our financing allows customers to make purchases and provides flexibility and convenience for customers needing roofing services but prefer to spread out payments over time. With this option, customers can enjoy the benefits of a new roof without immediate financial strain.